Compare

Archive · Cannondale · CAADX

Cannondale CAADX 2011–2012

Archive model 2011–2012. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Cannondale CAADX geometry for model years 2011, 2012. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size44485154565861
Stack538551567580587606625
Reach362362364377390404403
Head angle69.5°70.5°71°72°72.5°72.5°72.5°
Head tube120130145155160180200
Seat angle75°74.5°74°73.5°73°73°72.5°
Top tube (effective)515525535545560575590
Seat tube440470500530550570600
Chainstay432432432432432432432
Wheelbase1018101310161023103310541058
BB drop67676767676767
Fork offset50505050505050
Trail77706760575757
Standover755777798819830850873

Geometry source: cannondale.com

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.