Compare

Archive · Cannondale · SuperSix

Cannondale SuperSix 2013

Archive model 2013. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Cannondale SuperSix geometry for model year 2013. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size4850525456586063
Stack513519526544558577593620
Reach368376384384395399402399
Head angle71.5°72°72.5°73°73°73.5°73.5°73.5°
Head tube110115120140155175190220
Seat angle74.5°74.5°74°73.5°73.5°73°72.5°72°
Top tube (effective)510520535545560575590600
Seat tube460480500520540560580610
Chainstay405405405405405405408408
Wheelbase96296797397599099610081011
BB drop7272726969676767
Fork offset4545454545454545
Trail6562595656535353
Standover742755767788804825843869

Geometry source: cannondale.com

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.