Compare

Archive · Cannondale · Synapse

Cannondale Synapse Alloy 2018–2020

Archive model 2018–2020. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Cannondale Synapse Alloy geometry for model years 2018, 2019, 2020. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size44485154565861
Stack510530550570589609639
Reach365371376383389394403
Head angle70.2°70.8°71°71.9°72.1°72.3°72.5°
Head tube104123143159178202232
Seat angle74.7°74.6°74.3°73.9°73.5°73°72.5°
Top tube (effective)505517531547563580604
Seat tube400422443480520550590
Chainstay413413413413413413413
Wheelbase99299910101004101410251041
BB drop75757573737070
Fork offset60606050505050
Trail60575560595856
Standover680701722755787816851

Geometry source: cannondale.com

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.