Compare

Archive · Trek · Madone

Trek Madone 3/4 Series / 1 Series (H2 fit) 2013–2015

Archive model 2013–2015. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Trek Madone 3/4 Series / 1 Series (H2 fit) geometry for model years 2013, 2014, 2015. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size47 cm50 cm52 cm54 cm56 cm58 cm60 cm62 cm64 cm
Stack522535547555577598615634654
Reach369374379381387391395398401
Head angle71.2°72.1°72.8°73°73.5°73.8°73.9°73.9°74°
Head tube120130140150170190210230250
Seat angle74.6°74.6°74.2°73.7°73.3°73°72.8°72.5°72.3°
Top tube (effective)513521534543560574586598610
Seat tube444476493506533553573593613
Chainstay407407407407407407410410410
Wheelbase971971973978980987100010081015
BB drop727272707070686868
Fork offset454545454040404040
Trail686258565857565655
Standover711733747758781800819837856

Geometry source: ukrbike.com.ua

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.