Compare

Archive · Trek · Madone

Trek Madone H3 Fit 2011

Archive model 2011. Probably no longer sold new. I only have the frame geometry, not the build.

I’m buying or selling this bike ↓

Geometry ?

Trek Madone H3 Fit geometry for model year 2011. Model years are approximate: manufacturers rarely say exactly when the geometry changed.

Size43cm47cm50cm52cm54cm56cm58cm60cm62cm
Stack481525542559573591615634654
Reach355364368371374377381384387
Head angle70°71°71.9°72.1°72.6°73.3°73.8°73.9°73.9°
Head tube130125140155170185210230250
Seat angle75.5°74.6°74.6°74.2°73.7°73.3°73°72.8°72.5°
Top tube (effective)480509517529541554569581593
Seat tube388428459490515546566586606
Chainstay410410410410410410411411412
Wheelbase9719769779799839799879951004
BB drop527272727070686868
Fork offset505050454540404040
Trail626357615859565655
Standover654691709733755779801819837

Geometry source: ukrbike.com.ua

Bike from a listing

Buying this bike second-hand? Enter the size, stem and spacers actually on the bike to see whether it fits you.

Selling it? Fill in the details and paste the link into your listing. Buyers will see where the bars end up, based on what you enter.

How do I measure it?

Cover + spacers: measure from the top of the head tube to the underside of the stem. That’s the headset cover plus any spacers. Length and angle are usually printed on the stem (−6° is typical, with the stem pointing down). Bar reach is on the bar manufacturer’s website. If you can’t find it, leave it at 75 mm. Spacers above the stem show how much higher the stem could still go. Leave that blank and I’ll assume it can’t go any higher.

Is it an integrated cockpit, a one-piece bar and stem? Then the stem may not be swappable. Check with the seller.

Do you ride it? Enter it as your position.