Guerciotti Silvelle (2026)
Good to know: Configurable build
Configurable build (at least partly: the cockpit or bar width, for example). The stock build below is only one of the options.
Geometry ?
Guerciotti Silvelle 2026 geometry in sizes XS–XL: stack 511–560 mm, reach 373–384 mm, head angle 71.5–72°.
| XS | S | M | L | XL | |
|---|---|---|---|---|---|
| Stack | 511 mm | 517 mm | 527 mm | 546 mm | 560 mm |
| Reach | 373 mm | 382 mm | 384 mm | 384 mm | 380 mm |
| Head angle | 71.5° | 72° | 72° | 72° | 72° |
| Seat angle | 75° | 74.5° | 74° | 74° | 73.5° |
| Seat tube (c-t) | 440 mm | 490 mm | 520 mm | 540 mm | 560 mm |
| Head tube | 90 mm | 95 mm | 105 mm | 125 mm | 140 mm |
| Top tube (effective) | 510 mm | 525 mm | 535 mm | 540 mm | 545 mm |
| Chainstay | 425 mm | 425 mm | 425 mm | 425 mm | 425 mm |
Source: guerciotti.it, checked 1 Nov 2026 · bar position: worked out from published data
Stock build
Silvelle Shimano GRX 715 Di2 1x12
- Groupset
- Shimano GRX 715 Di2 1×12
- Stem
- QTC Alloy stem
- Handlebar
- QTC Alloy stem + QTC Energy bar
- Seatpost
- QTC Energy 27.2
- Saddle
- San Marco Monza
Silvelle Shimano GRX 822 1x12
- Groupset
- Shimano GRX 822 1×12
- Stem
- QTC Alloy stem
- Handlebar
- QTC Alloy stem + QTC Energy bar
- Seatpost
- QTC Energy 27.2
- Saddle
- San Marco Monza
Silvelle Shimano GRX 812 1x11
- Groupset
- Shimano GRX 812 1×11
- Stem
- QTC Alloy stem
- Handlebar
- QTC Alloy stem + QTC Energy bar
- Seatpost
- QTC Energy 27.2
- Saddle
- San Marco Monza
Source for all builds: guerciotti.it, checked 1 Nov 2026
Frames with similar geometry
Stack and reach within 12 mm of size XS (stack 511 / reach 373 mm).
Stack and reach within 12 mm of size S (stack 517 / reach 382 mm).
Stack and reach within 12 mm of size M (stack 527 / reach 384 mm).
Stack and reach within 12 mm of size L (stack 546 / reach 384 mm).
Stack and reach within 12 mm of size XL (stack 560 / reach 380 mm).
Spotted a mistake or a missing build? Let me know.
Are you the manufacturer, or do you sell this bike? I’m missing 7 values for this model’s stem and bars. Add them